Before the PO Goes Out: 7 Checks for Implants, Devices, and Chairside Equipment
2026-11-13 by Elena Varga
-
Who this checklist is for
-
1. Verify the consumable tail before you compare unit prices
-
2. Test customer service before you need it
-
3. Match the surgical technique document to the tray revision
-
4. For capital equipment, price the install, the training, and the network—not just the box
-
5. Understand what the instrument actually measures before you compare specs
-
6. Confirm invoicing, PO matching, and tax status before the first order
-
7. Get return, repair, and loaner terms in writing
-
What still trips people up
Who this checklist is for
I'm the purchasing coordinator for a 340-person orthopedic and dental group—four clinics, two ambulatory surgery centers, and a small research lab that somehow always needs something. I handle roughly $4.2 million a year in device, implant, and consumable orders—maybe $4.4 million heading into 2025, I'd have to check the ledger—across 19 vendors. Call it 900 purchase orders annually. I report to both the operations director and the finance controller, which means I get blamed from both directions when something goes wrong.
This checklist is for anyone ordering implants, capital equipment, or chairside gear who is not a clinician. You don't need to know how to do the surgery. You need to know what to verify before the PO goes out. There are seven checks here, in the order I run them—the first three before I send an RFQ, the last four before I sign anything.
I started building this list in 2020, when I took over purchasing with no medical background and immediately cost the company $2,400. More on that in check six.
1. Verify the consumable tail before you compare unit prices
The question everyone asks is "what's the implant price?" The question they should ask is "what else does this implant require, and who sells it?" I've watched buyers—including myself, early on—get laser-focused on the per-unit cost of an implant and completely miss the tray, the trial components, the screws, the sterilization container, and the torque driver. Those are frequently quoted separately. Sometimes they're quoted by a different division.
For orthopedic implants, ask for the full instrument tray configuration and the revision history of that tray. For dental implants, the fixture is often the cheapest line item; the abutments, healing caps, scan bodies, and prosthetic components are where the money actually goes. A supplier that sells you implants but can't give you a single, current list of compatible prosthetic components is going to be a problem in month three.
One thing worth saying plainly: Zimmer Biomet operates its dental business separately from its orthopedic commercial organization, as most large orthopedic-and-dental manufacturers do. Their implant catalogs are large. That's a strength if you need breadth, but it also means you should confirm which division handles which part number before you consolidate. I've had two POs bounce because I ordered a dental component through the orthopedic rep's contact.
2. Test customer service before you need it
Here's the thing: sales reps are not customer service. They are the friendly face before the signature. When you have a backorder at 4 p.m. on a Thursday before a Monday case, the rep is not the person answering the phone.
So test it. Call the published order and support line, ask about a specific lot number on a packing slip, or ask for the lead time on a part number you already have in inventory. Then watch three things: how long it takes to reach a human, whether you get a ticket or case number, and whether the answer arrives in writing.
A fair test case is something like Zimmer Biomet dental implants customer service—you call the public number, ask about a specific part and lot, and see what happens. I'm not telling you the answer will be good or bad. I'm telling you the answer is data you should collect before you sign a three-year agreement, not after.
I learned this the hard way in 2021. Our rep for a smaller vendor left the company in March. By June, nobody at that vendor knew who we were, and a $6,800 order sat unacknowledged for eleven days. Nobody's fault, really—but it was my problem.
3. Match the surgical technique document to the tray revision
This is the one most purchasing people skip, and it's the one that scares me the most. Surgical technique guides have revision numbers. Instrument trays have revision numbers. If they don't match, the trial components in the tray may not correspond to what the technique guide shows—and the person who discovers that is the scrub tech at 7:15 in the morning.
The Zimmer Biomet reverse shoulder surgical technique documentation is a useful example of why this matters. The technique guide is a controlled document with a revision date. The tray is a physical asset with its own revision. Your job as a buyer is not to interpret either one. Your job is to make it contractually clear that when the tray is updated, the corresponding technique documentation is updated and delivered at the same time, in the format your OR actually uses.
I assumed for a long time that "same part number" meant "same revision." It doesn't. I learned this when a tray we'd had for two years turned out to be one revision behind the guide a new surgeon had downloaded. Nobody got hurt. We got lucky. Now revision numbers go in the contract as an appendix, and I check them at every annual review.
4. For capital equipment, price the install, the training, and the network—not just the box
Capital equipment is where unit-price thinking fails hardest, because the box is rarely the expensive part over five years.
Take a fetal monitor. The monitor itself is one line item. Then there's the transducer set, the central station software license, the wireless network configuration, the EMR interface, the alarm configuration (which is a clinical decision, not an IT one), and the training hours for nursing. ECRI has flagged alarm management and networked device issues on its annual Top 10 Health Technology Hazards list for years running—this is not a niche concern.
A dental chair is the same story in a smaller package. Before the chair arrives you need to know: what electrical and plumbing rough-in it requires, whether your existing vacuum and compressor can support it, what the floor loading is, how far the chair needs to sit from the wall for full recline, and who pays for the millwork if the footprint changes. I've seen a $9,000 chair turn into a $23,000 project (which, honestly, nobody warned us about).
Ask every capital vendor three questions in writing: Who pays for installation? How many training hours are included, and what's the hourly rate after that? What's the response time for a service call, and is a loaner included?
5. Understand what the instrument actually measures before you compare specs
If you're buying lab equipment and you don't have a science background, this is the check that keeps you from buying the wrong thing with confidence.
Flow cytometry is a good example. What is flow cytometry, in plain terms? You suspend cells in fluid, run them single-file past a laser, and measure how they scatter light and fluoresce. That tells you how many cells there are, what type they are, and what markers they're carrying. The purchase decision, though, is not "how many lasers." It's which fluorochromes you need to detect, whether the reagent panels are validated for that instrument, whether the software license covers the analysis seats you actually need, and who handles sheath fluid and waste disposal.
I said "ten-color" to a vendor once and they heard "ten fluorescence channels plus all reagents and a validated panel." We were using the same words and meaning different things. Discovered it when the quote came back and the reagent line was missing entirely.
6. Confirm invoicing, PO matching, and tax status before the first order
This is the $2,400 mistake. In 2020 I found a supplier quoting 30% below our regular vendor on a consumable we used constantly. I ordered $2,400 worth. They sent a handwritten receipt. Finance rejected the expense report outright—no itemized invoice, no PO reference, no tax ID. The money came out of my department budget because I'd already received the goods.
In a medical setting this check gets more complicated, not less. You've got GPO contract pricing to match, UDI requirements to satisfy, and possibly sales tax exemption certificates to file per facility. Before the first order, confirm four things in writing:
- Can they invoice against your PO number, in your format, with line-item detail?
- Can they provide the device identifier (DI) so you can look it up in FDA's AccessGUDID database? UDI labeling has been required for most device classes for years now—this is not an unusual request.
- Do they have your tax exemption certificate on file, per ship-to location?
- Who do you call when the invoice doesn't match the PO?
Five minutes of verification beats five days of correction. I say that a lot. I mean it every time.
7. Get return, repair, and loaner terms in writing
Implants are usually non-returnable once the sterile package is opened—and "opened" is defined differently by different suppliers. Ask what counts. Ask what happens to a tray that's been sterilized but not used. Ask whether the answer changes if the case was canceled by the surgeon rather than the patient.
For equipment, the service contract is where the real money hides. Response time, on-site versus remote, parts mark-up, travel charges, loaner availability, and the definition of "business hours" all belong in the document. A service agreement that promises four-hour response "during normal business hours" means something very different on a Saturday.
What still trips people up
Four things cause most of the preventable problems I've dealt with:
- Comparing unit prices across quotes with different scopes. If one quote includes the tray and the other doesn't, you're not comparing prices. You're comparing two different products.
- Treating the sales rep as the support contact. Reps move. Accounts don't always move with them.
- Leaving revision control out of the contract. If it's not in the appendix, it's not enforceable.
- Skipping the invoice test on a small order. The $400 trial order is the cheapest place to find out your AP system and their billing system don't speak the same language.
The pattern behind all four is the same: something that takes five minutes to check now, and five days to fix later. The checklist isn't glamorous. It's just cheaper.